The larger version is used for the rear milling of the seal groove during 45° cutting in the frame, glass and leaf compression seal areas as well as the front milling of many different types of transoms/jambs and mullion contours. The milling station is equipped with a 4.5 – 6 KW cutting motor, with speed ranges from 3,000 – 6,000 revs/min and it adjusts itself automatically to the corresponding profile geometry. The tools are changed manually using our fast tool-change system or automatically using a tool-changer fitted with a HSK 63 holder and up to 21 tools positions can be set up.
We recommend the positioning of 2 milling units (1 x front cutter and 1 x segment end cutter) in the real time buffer in the case of high performance requirements. Automatic tool changers with 12 or a maximum of 21 tools can also be integrated here. A high performance system’s capacity for machining frames and leaves will only be affected slightly if this version is used.
We will find the correct solution for you when we know your profile, the corresponding contours and the capacity.